Radian® 3QXT®+ FirstClass™ SafePlus™

Radian® 3QXT® FirstClass™ SafePlus™ Car Seat, Instruction Manual, SafeStop and SafePlus™ Side Impact Management Pod, 2x Cup Holders, SafePlus™ 2-in-1 Anti-Rebound Calf Support, Harness Pads, Rear Facing Base, Toddler Liner, Lap Belt Cushion (US only)

SafePlus™ Newborn Protection Insert, SafePlus™ 2-in-1 Infant Positioning Liner, SafePlus™ Newborn Harness Pads, SafePlus™Newborn Travel High Wedge

Radian® R series manuals are located in a pouch sewn into the seat cover on the back of the seat. All Radian® Q series manuals are located in the storage compartment on the back of the seat. Look for the manual storage icon to locate the manual.

The Radian® 3QXT® FirstClass™ SafePlus™ is suitable for newborns 4lbs and up. It features a 4 stage newborn protection: a Safe+® newborn insert, Safe+® newborn high wedge, Safe+® 2-in-1 infant positioning liner, and Safe+® harness pads.

The Radian® Angle Adjuster is an accessory which can be purchased separately.

The infant support cushion & Travel High Wedge are for comfort and positioning. It's not required & is at the caregiver’s discretion. The Newborn Protection Insert for Radian® 3QX, 3QXT®, 3QXT® FirstClass™ SafePlus™are only used with infants 4-10lbs

On all Radian® models including R-series and Q-series, the harness should be placed at or just below the child’s shoulder when they are rear-facing. The harness should be snug. You should not be able to pinch the webbing at your child's shoulders.

Use of the harness pads are optional on seats made as of 2018 and forward. For seats made prior to 2018, their use is required when using the seat forward-facing, but still optional rear-facing.

The handle is only used to adjust the height of the head support. It does not adjust the height of the harness straps.

Yes, a removable cup holder is included in the box with your Radian® 3QX, 3QXT®, 3QXT® FirstClass™ SafePlus™, 3RX, 3RXT®, and the 3RXT® SafePlus™ car seat. Cup holders can be easily installed by inserting the stem into the cup holder slot.

Rebound bars are not sold separately. They can’t be used in a Diono seat that doesn’t originally have one. Rebound bars are sold to customers with missing or damaged part. If you need a spare rebound bar, contact Diono customer service for help.

The bottom of the Radian® 3R and 3Q series do fold for more compact storage.

51 inches (129.5 cm) is the minimum vehicle seat width needed between door handles (or other vehicle interior structures) to fit 3 Radian® models.

Yes, Diono Radian® Q-series All-in-One car seats can be installed rear- or forward-facing with the vehicle seat belt, as long as the seat belt system is compatible with the car seat.

Yes, the Safe+® anti-rebound bar is required when using a Radian® 3QX, 3QXT®, 3QXT® FirstClass™ SafePlus™ and the 3RXT® SafePlus™ rear-facing.

The rear-facing base is included with all of our Radian® all-in-one convertible car seats.

Yes, anytime a Diono seat is installed rear facing the rear facing base must be installed.

The adjustable bottom should be lowered when the occupant is forward facing while using the 5-point harness system and weighs 25 lb or more. The seat bottom should not be lowered while in rear-facing or booster mode.

If rear-facing using the first 2 harness slots, raise the head support even with the top of the seat. When using the 3rd harness slot, lower the head support so the bottom is even with your child's jaw.

When in rear-facing, the detachable base creates the correct recline angle.

A rear-facing child is too tall for the seat if any of the following are true: they are 44in or taller, there is 1 1/2in or less between the top of their head and the top of the seat shell.

All Diono All-in-One car seats can be used rear-facing up to 50 lbs or 44 inches height. We encourage rear-facing as long as possible, since it is the safest way for children to travel!

A rear facing Radian® uses 30-36 inches (76 - 91.4 cm) between the vehicle's backseat and seat back of the front seat. This also depends on the vehicle's seat shape and contour.

When in forward-facing mode a child is too tall for the seat if they are 57in or taller, the tops of their ears are higher than the seat shell, or their shoulders are touching the bottom of the adjustable head support at its highest position.

In forward-facing, the calf support panel of can lock at different angles for adjustable comfort. In forward-facing mode, the calf support panel is optional. However, in rear-facing mode the calf support panel is required and has 1 position.

Both installations are safe and have been approved for forward-facing installations. Neither is safer than the other, use the one that gives the best installation.

Both installations are safe and have been approved for rear-facing installations. Neither is safer than the other, use the one that gives the best installation.

Diono seats have not been tested with harnessing systems that are not included with the car seat. Do not use any 3rd party or after market harness system with your Diono car seat.

No. Always follow the car seat manufacturer guidelines regarding use of items not included with the car seat.

The Safe+ side impact pod is a safety feature compatible with the Radian® Q Series & Radian® 3RXT® SafePlus™. It must be installed on the car seat side closest to the car door. It works by redirecting crash force energy away from the seat and child

No, the Safe+® anti-rebound bar is a feature exclusive to the Radian® Q series, and the 3RXT® SafePlus™.

Our car seat fabrics are tested to ensure they do not contain any legally restricted harmful flame retardants. In order to meet Federal and Canadian Motor Vehicle Safety Standards for flammability, our car seat fabrics do contain flame retardants.

No. Thick clothing creates extra space between the harness and the child which is a safety hazard. We recommend removing the coat and harnessing your child in their seat. Then you can place their coat on backwards or use a blanket to keep them warm.

Diono car seats and boosters are tested to meet or exceed Federal Motor Vehicle Safety Standards (FMVSS) per NHTSA, and Canadian Motor Vehicle Safety Standards (CMVSS), per Transport Canada.

All Diono convertible car seats have a life span of 10 years, starting from the date you purchase your seat. In the event the date of purchase cannot be determined then we use the date of manufacture.

Please consult the seat manual. Diono car seats manufactured in 2017 & prior will continue to be approved for use with Ford's inflatable seat belts. Newer seats will not allow them to be used and will be stated in the car seat's manual.